kj  Our Process    |     Soda Vs. Bead Blasting    |     Gallery     |     Prices and Specials  |    Testimonials    

Procedure for the restoration of your pool tile and surfaces:

Step 1

  • To start, a trained Baker Brother technician will bring your water down to a level several inches below the effected tile.  Although, what could be recommended, is that we drain your pool, which is a good preventative measure to ensure you have calcium free water. 

Step 2

  • With our professional pressurized equipment, we remove calcium build up around the entire length of your pool with our MaxxStrip abrasive. We will methodically clean and polish all tile that has dirt or calcium build up. When your tile has been thoroughly restored, the debris and any undissolved material will settle to the bottom of the pool which we will then pump out. 

Step 3

  • All residue is cleaned from your tile and deck.  Any debris that has settled to the bottom of the pool or filter will be pumped out and your pool will be vacuumed to leave it looking crystal clear. 

Step 4

  • After your tile is showing a polished finish, we apply our water based sealer that will ensure the longevity of the surface and prevent future build up of calcium and dirt. There is no way protect the tile permanently from future calcium build up, although the protectant and removal of calcium in the water by draining the pool will give your surface a much longer life. 

*****This process works on all tile, pebbletech, water features, bricks, and rocks.******

Name *
E-mail *
Reason of Contact
  * Compulsory fields